In the use of the jacquard machine, it is inevitable that there will be failures, so, what are the types of failures of the electronic jacquard machine? What is the cause of each failure?
1. Locally literate
a. After ensuring that the operation is correct, replace the solenoid valve.
b. Check whether the front and rear of the motion hook are worn out.
2. Permanent or local component sinking
a. Check the original motion structure.
b. Ensure the contact of the solenoid valve without grease and dirt.
c. If the contact surface presents a loss point, the solenoid valve must be replaced.
d. Check the operation of the return spring.
3. Permanent lift
a. It may be a short circuit of the solenoid valve
b. Check the wearing parts in front and back of the motion hook.