Jacquard machine is an important invention of Chinese tradition, under the development of modern science and technology, its use is more convenient and fast. Now let's take a look at the repair and maintenance methods of the jacquard machine!
First, the maintenance of the jacquard machine
1. Every day, the rotor and shaft and the spindle must be lubricated and the table surface must be wiped clean to avoid falling objects stuck in the ingot, and before starting the machine, it must be confirmed that there are no obstacles within the machine's operating range;
2. Refuel 2~3 times per shift to keep the electrical appliances clean after 600 hours of work, it is necessary to carry out compulsory oil preservation screws at the bottom of the lower disc side, release the oil in the lower disc and rinse the oil injection hole with diesel fuel on one side of the upper disc surface, add heat-resistant engine oil to the gear oil amount to the scale line;
3. Check every month whether the gear oil in the base box of the machine is within the specified range (the oil level must be in the center of the two scales of the oil measuring needle, and you need to add oil when it is lower than the bottom line of the oil measuring needle, but not too much, to avoid oil external injection) When starting, please run at a low speed for 5 minutes, and then increase the speed to clean up the broken wire guide rail and other rotating parts on the plate surface in time to maintain lubrication;
4. Jacquard loom annual maintenance, jacquard loom, check whether the oil in the lower disc is in the middle of the scale line, check whether the oil in the turbine box is lower than the scale line, check whether the continuous rotating part is loose, clean the spindle with gasoline (it is forbidden to use high-strength thinner, such as pine perfume, acetone), replace the wear parts, and fill the oil appropriately.