A kind of electronic jacquard machine transmission mechanism production method

On the jacquard machine, the grain plate is set on the flower tube, and each weave is turned over by a grain plate, and the flower tube is pressed against the horizontal needle once. When there are eyelets on the grain plate, the head end of the horizontal needle extends into the eyelet of the pattern plate and the flower tube, so that the hook end of the straight needle is still hung on the knife. When the knife rises, the straight needle rises, and the heald is lifted through the first line hook and the thread, and the warp wire that penetrates the heald eye is also lifted, forming the upper layer of the shuttle. There is a heald hammer hanging in the lower heald ring, and when the shuttle is closed, it relies on its weight to play a role in resumption. When there is no hole on the grain plate, the horizontal needle retreats through the convex head, pushes the corresponding straight needle, and makes the hook end of the straight needle detach from the carrying knife, so that the heald and warp wire connected to the straight needle are not lifted, and the warp wire sinks underneath, forming the lower layer of the shuttle. Therefore, the movement of each warp wire is determined by whether there are holes or no space on the grain plate, and the holes on the grain plate are rolled according to the design requirements of the pattern and structure, so the movement of the warp wire also meets the requirements of the pattern and organization