Key points of operation of jacquard lace machine

1) According to the thickness of the processing material, adjust the height of the cylinder appropriately. Turn the upper nut of the cylinder by hand, turn clockwise, the flower wheel moves up, and vice versa.
2) Adjust the speed of the flower wheel, ultrasonic power, and check whether the audio is normal.
3) Test seam or pressure, and fine-tune to the best process state several times according to the welding quality.
10. Shutdown:
1) Turn off the power switch and the switch indicator is off.
2) Check whether there is butter at each lubrication point, and oil must be added if there is a shortage of oil.
3) Clean the equipment, there can be no debris on the countertop, and the ground should be kept clean within one meter around the equipment.